KEISOKU GIKEN LOAD EDGE Series - Page 30

Load Edge Series
30 Names and Functions
(9) Icon indicating the scale of increase/decrease load setting by the rotary knob
Unless you operate in some specific items, you can use the rotary knob to change load
setting. The step value of load change can be selected. This icon shows minimum
increment as shown below.
1
0
.
0
0
0
0
0
0
.
0
0
0
1
0
0
.
0
0
1
0
0
0
.
0
1
0
0
0
0
.
1
0
0
0
0
1
.
0
0
0
0
The minimum increment values are common for all load modes.
(10) BIAS Unit On/Off
It shows BIAS Unit state (On/OFF)
(11) Control signal accepting signal
This shows that this unit has been externally controlled.
While showing this mark, front panel controls are disabled.
When return to manual control, press [CE] key.