Keysight N9912A - Page 338

2 Keysight N9912-90001 User’s Guide
Index
Coupled Frequency, 3-11, 4-21,
7-8
Coupled Markers, 16-5
CPM, 10-1
cursor moving, 17-9
cursor, moving, 17-4, 17-9, 17-10
D
data analysis features
, 16-1,
17-1
data indicator (*), old, 8-35
data indicator, old (*), 8-35
Date and Time Setting, 18-16
declaration of conformity, 21-14
delta marker, 16-3, 16-4
delta markers, 16-3
Detection Method, 8-30
detection method, 8-30
display
brightness
, 18-5
colors, 18-5
front panel, 2-12
preferences, 18-9
settings, 18-5
display "live" and memory
traces
, 13-14
Display Resolution
VVM
, 14-5
disposal of battery, 20-7
dissipate static charge, 2-6
DTF
measurements
, 4-17, 4-18
settings, 4-19, 5-3, 6-3
start and stop distance, 4-18
DTF Measurement, 4-19
DTF settings, 4-19
DTF Start and Stop
Distance
, 4-20
Dynamic Range, 5-20
dynamic range, 5-20
E
Edit a Cable File
, 4-23
DTF, 4-23
edit keywords, 17-9
edit, enable and disable the
current prefix
, 17-10
edit, enable and disable the
current suffix
, 17-10
Electrical Delay, 5-10
Erase User Data, 18-23
error
meas UNCAL
, 8-21, 8-35
red flashing LED, external
battery charger
, 20-5
red red flashing LED, external
battery
charger
, 20-5
systematic, 7-2
ESD, 21-9
Event Log, 18-22
external frequency
reference
, 18-15
External Gain, 8-10
External triggering, 8-25
external triggering, 8-25
external zeroing, 11-3
F
features, overview
, 1-1
Field Strength
Measurements
, 8-12
File Management, 17-1
file management, 17-1
files
managing
, 17-7
prefixes, 17-10
suffixes, 17-10
FM Tune & Listen, 8-16
folders, 17-8
Format
NA Mode
, 5-7
format, NA mode, 5-7
FreqMaskTrigger, 9-12
frequency
external reference
, 18-15
mode, DTF, 4-20
range, NA mode, 5-8
range, setting, 3-5
range, step size, 8-5
step size, 8-5
Frequency Counter at SA
Marker
, 8-34, 16-13
Frequency Offset Using Power
Sensor
, 12-1
Frequency Range
NA Mode
, 5-8
front panel, 2-7
Full Screen Mode, 18-7
G
Gating
, 6-10
gating, 6-10
gauge, battery, 20-2
getting started information, 2-1
GPS, 18-12
group delay, 5-7, 5-8
H
high-temperature
protection
, 2-4
hold, 18-2
how to
change
frequency step size
, 8-4,
8-5
units to feet, 4-25
check for a compressed
measurement
, 8-11
control the preamp, 8-11
create
delta marker
, 16-4
markers, 16-2
edit keywords, 17-9
edit, enable and disable the
current prefix
, 17-10
enter
numeric values
, 2-14
make
1-port cable loss
measurement
, 3
-12, 3-13
2-port insertion loss
measurement
, 3
-14
DTF
measurements
,
4-18
manage files, 17-7
measure return loss, 3-12
monitor the internal FieldFox
temperature
, 2-4
move
cursor
, 17-4, 17-10
reference marker, 16-4
name files, 17-3
perform
normalization
, 7-7
O, S, L cal, 7-5