Keysight u2722a - Factory Default Settings; Table 15-1 List of Factory Default Settings

15 Default Factory Settings
138 Keysight U2722A/U2723A Programmer’s Reference
Factory Default Settings
The following table shows the list of the factory default settings.
Table 15-1 List of factory default settings
SCPI Commands Default value
CONFigure:SSI NONE, 0
*ESE 0
*OPC 0
OUTPut 0
SENSe:CURRent[:DC]:NPLCycles 0
SENSe:SWEep:POINts 1024
SENSe:SWEep:TINTerval 1
SENSe:VOLTage[:DC]:NPLCycles 0
[SOURce:]CURRent 0
[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude] 0
[SOURce:]CURRent:LIMit 0.0000001
[SOURce:]CURRent:RANGe R1uA
[SOURce:]MEMory:CONFigure:POINts 1,1,1
[SOURce:]MEMory:LIST 1
[SOURce:]VOLTage 0
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] 0
[SOURce:]VOLTage:LIMit 0.2
[SOURce:]VOLTage:RANGe R2V
STATus:OPERation:ENABle 0
STATus:OPERation:NTRansition 0
STATus:OPERation:PTRansition 252
STATus:QUEStionable:ENABle 0