Keysight u2722a - [Source:]Memory:voltage:range

9 SOURce Subsystem
76 Keysight U2722A/U2723A Programmer’s Reference
[SOURce:]MEMory:VOLTage:RANGe
Syntax
[SOURce:]MEMory:VOLTage:RANGe <range>, (@<ch>)
This command stores the VOLTage:RANGe <range> command into the channel
active memory list.
Parameters
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:VOLT:RANG R20V, (@1)
See Also
[SOURce:]MEMory:VOLTage:LIMit
[SOURce:]MEMory:VOLTage:MEASure
Item Type Range of values Defaul t value
<ch> NR1 1 through 3 Required parameter
<range> CPD – R2V – 2 V range
– R20V – 20 V range
Required parameter