Keysight u2722a - Characteristics and Specifications; Datasheet Reference

SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 63
[SOURce:]MEMory:LIST:CLEar
Syntax
[SOURce:]MEMory:LIST:CLEar (@<ch>)
This command clears the active memory list’s command.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:LIST:CLE (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:READ?
[SOURce:]MEMory:LIST:STORe
Item Type Range of values Defaul t value
<ch> NR1 1 through 3 Required parameter