SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 67
[SOURce:]MEMory:LIST:STORe
Syntax
[SOURce:]MEMory:LIST:STORe (@<ch>)
This command stores the channel active memory list into the nonvolatile memory.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:LIST:STOR (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:READ?
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter
To Next Page
Loading...
