9 SOURce Subsystem
62 Keysight U2722A/U2723A Programmer’s Reference
[SOURce:]MEMory:LIST
Syntax
[SOURce:]MEMory:LIST <list>, (@<ch>)
This command sets the channel active memory list.
[SOURce:]MEMory:LIST?
Queries the channel active memory list.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Returned Query Format
<NR1>
Example
MEM:LIST 1, (@1)
MEM:LIST?(@1)
See Also
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:READ?
[SOURce:]MEMory:LIST:STORe
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter
<list> NR1 – 1: Memory list 1 is set as the active memory list
– 2: Memory list 2 is set as the active memory list
1
To Next Page
Loading...
