Keysight u2722a - Appendix A: Self-Test Return Codes

9 SOURce Subsystem
66 Keysight U2722A/U2723A Programmer’s Reference
[SOURce:]MEMory:LIST:READ?
Syntax
[SOURce:]MEMory:LIST:READ? (@<ch>)
This command reads the commands from the channel active memory list.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Returned Query Format
<AARD>
Memory list’s command responses are separated by semicolons.
If there are no commands in the memory list, null is returned.
Example
MEM:LIST:READ? (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:STORe
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter