Keysight u2722a - 6 Measure Subsystem; Measure[:Scalar]:Current[:DC]

6 MEASure Subsystem
36 Keysight U2722A/U2723A Programmer’s Reference
MEASure[:SCALar]:CURRent[:DC]?
Syntax
MEASure[:SCALar]:CURRent[:DC]? (@<ch>)
Queries the current measured across the current sense resistor inside the
U2722A/U2723A.
Parameter
Returned Query Format
<NR3>
The reading is in the form of +9.99999999E+10 when output is set to OFF.
Example
MEAS:CURR? (@1)
Typical Response: +9.99999999E+10
See Also
MEASure[:SCALar]:VOLTage[:DC]?
MEASure:ARRay:CURRent[:DC]?
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter