Keysight u2722a - Appendices

SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 65
[SOURce:]MEMory:LIST:LOAD
Syntax
[SOURce:]MEMory:LIST:LOAD (@<ch>)
This command loads the channel active memory list from the nonvolatile memory.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:LIST:LOAD (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:READ?
[SOURce:]MEMory:LIST:STORe
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter