SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 75
[SOURce:]MEMory:VOLTage:SOURce
Syntax
[SOURce:]MEMory:VOLTage:SOURce <value>, (@<ch>)
This command stores the VOLTage <value> command into the channel active
memory list.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:VOLT:SOUR 20, (@1)
See Also
[SOURce:]MEMory:VOLTage:LIMit
[SOURce:]MEMory:VOLTage:MEASure
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter
<value> NRf The maximum value is dependent on the voltage
range set in the memory list
Required parameter
To Next Page
Loading...
