Keysight u2722a - Appendix B: Time-out Settings

9 SOURce Subsystem
68 Keysight U2722A/U2723A Programmer’s Reference
[SOURce:]MEMory:OUTPut
Syntax
[SOURce:]MEMory:OUTPut <mode>, (@<ch>)
This command stores the OUTP <mode> command into the channel active
memory list.
Parameters
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:OUTP ON,(@1)
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter
<mode> Bool OFF or 0: Disables the output
ON or 1: Enables the output
Required parameter