Keysight u2722a - [Source:]Memory:current:range

SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 61
[SOURce:]MEMory:CURRent:RANGe
Syntax
[SOURce:]MEMory:CURRent:RANGe <range>, (@<ch>)
This command stores the CURRent:RANGe <range> command into the channel
active memory list.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:CURR:RANG R120mA, (@1)
See Also
[SOURce:]MEMory:CURRent:LIMit
[SOURce:]MEMory:CURRent:MEASure
Item Type Range of values Defaul t value
<ch> NR1 1 through 3 Required parameter
<range> CPD – R1uA – 1 μA range
– R10uA – 10 μA range
– R100uA – 100 μA range
– R1mA – 1 mA range
– R10mA – 10 mA range
– R120mA – 120 mA range
R1uA