Keysight u2722a - 4 Configure Subsystem; Configure:ssi

4 CONFigure Subsystem
30 Keysight U2722A/U2723A Programmer’s Reference
CONFigure:SSI
Syntax
CONFigure:SSI <status>, (@<address_list>)
This command sets the synchronization status when used in the U2781A modular
instrument chassis.
CONFigure:SSI?
This query command returns a string value, which represents the synchronization
status.
Parameters
Remark
This command will force all reference clock sources to SSI (Synchronous
Simultaneous Interface).
NOTE
The U2722A/U2723A is not designed to function as a master in synchronization.
Item Type Range of values Defaul t value
<address_list> NR1 0 through 7 Required parameter
<status> CPD – NONE: None
– SLAVe: To receive triggering source from a master
NONE
NOTE
– This command is only operational when it is used in a U2781A modular
instrument chassis.
– Each U2722A/U2723A occupies two slots in the U2781A.