Keysight u2722a - [Source:]Memory:list:data

SOURce Subsystem 9
Keysight U2722A/U2723A Programmer’s Reference 69
[SOURce:]MEMory:LIST:DATA?
Syntax
[SOURce:]MEMory:LIST:DATA? (@<ch>)
This command reads the data result after executing the commands in the channel
active memory list through a remote or hardware trigger action.
Parameter
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Returned Query Format
<NR3>{,<NR3>}
The reading is in the form of +9.99999999E+10 when output is set to OFF or no
measurement is made during the memory list’s commands execution.
Array values responses are separated by commas.
Example
MEM:LIST:DATA? (@1)
See Also
[SOURce:]CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:READ?
[SOURce:]MEMory:LIST:STORe
Item Type Range of values Default value
<ch> NR1 1 through 3 Required parameter