General Information
February 2012 1-4 P/N 06-237058-001
1-5 SYSTEM COMPONENTS
The main components of the basic ARIES NETLink control unit are:
•System Enclosure
• Main Controller Board with keypad and display
• Power Supply Unit/Power Management Assembly
• Standby Batteries, 12 Vdc (2 required for 24 Vdc - sold separately)
1-6 OPTIONAL COMPONENTS
• Expansion Card Cage and backplane to house optional Expansion Cards:
– Signal Line Circuit (SLC) Card
– Release/Notification Appliance Circuit (R-NAC) Card
–Relay Card
–City Tie Card
– Network Interface Card (NIC)
– Digital Alarm Communicator Transmitter (DACT) Card
– Internet Communications Module (ICM) Card
• Trim Ring for flush-mounted enclosures
• Additional Expansion Enclosures
• Additional Power Supply Units/PMU Boards
• Battery Tray for bottom tier
• Large Capacity Battery Cabinet
• Remote Display Control Module (RDCM) with enclosure
• Remote LED Annunciator Module (R-LAM) with enclosure
• Integrated Front Panel LED Annunciator
• ATM-L LED Driver Module
• ATM-R Relay Driver Module
• Fiber Optic Converter Module in enclosure
• Remote Configuration Software (for control unit access/configuration from user-supplied PC)
1-7 SYSTEM ENCLOSURE TYPES
The ARIES NETLink control unit enclosure is designed to house all of the standard features of the
control unit; expanded systems may require additional enclosures.
Two different sizes of the enclosure are available (specified at time of order):
• 3-Tiered Main or Expansion Enclosure: 31.50 in. (H) x 14.375 in. (W) x 5.375 in. (D)
• 2-Tiered Main or Expansion Enclosure: 22.50 in. (H) x 14.375 in. (W) x 5.375 in. (D)
Additional cabinets are available for remote use/LED Annunciation and larger capacity batteries:
• RDCM/LED Annunciator Remote Enclosure: 7.50 in. (H) x 12.75 in. (W) x 2.75 in. (D)
• Large Capacity Battery Cabinet: 12 in. (H) x 20in. (W) x 8.25 in. (D)
To Next Page
Loading...
Need help?
General
