P/N 06-237058-001 1-21 February 2012
1-14 OPTIONAL REMOTE DEVICES
In addition to expansion cards, optional remote devices can be used to expand the functionality of the
ARIES NETLink system. These devices connect to the ARIES NETLink but reside outside the main
enclosure.
1-14.1 Remote Devices Using RS232 or USB Ports
RS232 and USB ports located on the Main Controller Board provide a means to interface to a PC,
printer, an ICM Card or modbus clients. Refer to Section 2-11.3 in Chapter 2, Installation, for a list
of recommended printer models.
1-14.1.1 OPTIONAL CONFIGURATION VIA REMOTE COMPUTER
The ARIES NETLink control unit may be configured remotely from a PC connected to one of the MCB
RS232 ports, if desired.
1-14.1.2 OPTIONAL MONITORING VIA INTERNET
The ARIES NETLink system may be remotely monitored by means of the Internet, if desired, by using
an Internet Communication Module connected to one of the MCB RS232 ports. Refer to the Internet
Communications Module User’s Guide (P/N 06-236542-003) for a complete description of the ARIES
NETLink Internet user interface.
Note: The Internet Communications Module (ICM) Card must be installed for this option.
To Next Page
Loading...