P/N 06-236530-001 3-47 August 2013
3-2.5.2.4.17 How to Enable the Flashing LEDs on SmartOne Detectors
Purpose: To enable one or more SmartOne detector LEDs to resume
flashing in standby operation. The flashing LEDs were disabled in a
prior blink-control operation.
3-2.5.2.4.18 How to Replace an SLC Device
Purpose: To replace an existing device on an SLC with a new device.
Note: Before performing the following procedure, remove the “old”
device and connect the “new” device to the SLC. The “old”
device must report as “trouble open” and the “new” device must
report as “unregistered” to ensure that the devices have
different addresses.
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press 3 Key Access "SLC Devices" option
5 Press "Scroll" Key Access additional options
6 Press 5 Key Select "Blink Control"
7 Use keypad to select address or range of
addresses to re-enable detector-LED flashing.
Press "Enter" Key to confirm selection.
Specify addresses to enable flashing LEDs in
normal operation
8 Press 2 Key and then press "Enter" Key to confirm
selection.
Re-enable flashing LEDs
9 Wait until the message appears in the display,
completed or failed.
Number of detectors are shown.
10 Exit Menu System
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press 3 Key Access "SLC Devices" option
5 Press "Scroll" Key Access additional options
6 Press 6 Key Select "Replace Device"
7 Enter the address of the device being replaced
and then press "Enter" Key to confirm selection.
Specify “Address to be Replaced (1-255)”
8 Enter the address of the new device being added
and then press "Enter" Key to confirm selection.
Specify “Address of Replacement Device
(0-255)”
9 Press 1 key to keep the current settings for the
new device or press 2 key to use the default
settings.
Select “Use Existing” or “Set Default” for the
settings of the new device.
10 Exit Menu System
To Next Page
Loading...
