P/N 06-236530-001 3-51 August 2013
3-2.5.2.4.23 How to De-Activate Day/Night Alarm Thresholds for Smoke Detectors
Purpose: To de-activate daytime and nighttime alarm thresholds for
smoke detectors.
3-2.5.2.4.24 How to Change the Owner’s Password
Purpose: To change the owner's password from its current setting. The
factory-default setting is 973480.
Step Action Result
1 Press 0 Key Initiate Menu Access
2 Enter Password; press "Enter" Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 4 Key Access "Programming" option
6 Press 1 Key Select "Day/Night" option
7 Press 3 Key Select "Activate" option
8 Press 2 Key and then press "Enter" Key to confirm
selection
De-activate day/night settings for weekdays
9 Press 2 Key and then press "Enter" Key to confirm
selection
De-activate day/night settings for weekends
10 Press "Backspace" Key (as required) Exit Menu System
11 Wait until "Initializing Configuration" message
disappears from display
Resume normal operations
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password 973480; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 4 Key Select Programming option
6 Press 2 Key Select "Passwords" option
7 Press 1 Key Select Owner's option
8 Use keypad to enter new password.
Press "Enter" Key to confirm selection.
Specify new owner's password
9 Use keypad to re-enter new password.
Press "Enter" Key to confirm selection
Confirm new owner's password
10 Press "Backspace" Key (as required) Exit Menu System
11 Wait until "Initializing-Configuration" message
disappears from the display.
Resume Normal Operation
To Next Page
Loading...
