P/N 06-236530-001 3-65 August 2013
3-2.5.2.4.45 How to Change a Networked Control Unit's Group Number
Purpose: To change a control unit's network-group number
assignment.
CAUTION
Ensure that this procedure does not introduce an incorrect network grouping.
For example, if the group number was changed from 2 to 3, be sure that it
operates correctly with all other control units in Group 3.
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 6 Key Select "Network" option
6 Press 3 Key Select "Group"
7 Use keypad to enter new group number and press
"Enter" Key to confirm selection.
Specify new group number
8 Press "Backspace" Key (as required) Exit Menu System
9 Wait until "Initializing Configuration" message
disappears from the display.
Initialization complete
To Next Page
Loading...
