P/N 06-236530-001 3-75 August 2013
3-2.5.2.4.57 How to Register Remote-Annunciator Modules
Purpose: To add one or more remote-annunciator modules
3-2.5.2.4.58 How to De-Register Remote-Annunciator Modules
Purpose: To remove one or more remote-annunciator modules
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 7 Key Select "Control Modules" option
6 Press 1 Key Select Registration Routine
7 Press 1 Key for ATMs or
Press 2 Key for RDCMs.
Press "Enter" Key to confirm selection.
Select module type to register
8 Use keypad to enter single module or range of
modules to register.
Press "Enter" Key to confirm selection.
Execute Registration Procedure for single module
or range of modules entered in this step
9 Press "Backspace" Key (as required) Exit Menu System
10 Wait until "Initializing Configuration" message
disappears from the display.
Resume Normal Operations
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 7 Key Select "Control Modules" option
6 Press 2 Key Select De-Registration Routine
7 Press 1 Key for ATMs or
Press 2 Key for RDCMs.
Press "Enter" Key to confirm selection.
Select module type to de-register
8 Use keypad to enter single module or range of
modules to de-register.
Press "Enter" Key to confirm selection.
Execute De-Registration Procedure for single
module or range of modules entered in this step
9 Press "Backspace" Key (as required) Exit Menu System
10 Wait until "Initializing Configuration" message
disappears from the display.
Resume Normal Operations
To Next Page
Loading...
