Kidde FX-64 User Manual

Chapter 3: System operation
P/N 3102352-EN • REV 005 • ISS 28DEC18 153
Table 47: Loop events that can be disabled
Event
ID
Loop 1 fault
001
Loop 2 fault
011
Loop 3 fault
021
Loop 4 fault
031
Loop 1 card fault
003
Loop 2 card fault
013
Loop 3 card fault
023
Loop 4 card fault
033
Loop 1 unconfigured alarm
004
Loop 2 unconfigured alarm
014
Loop 3 unconfigured alarm
024
Loop 4 unconfigured alarm
034
Loop 1 unconfigured trouble
005
Loop 2 unconfigured trouble
015
Loop 3 unconfigured trouble
025
Loop 4 unconfigured trouble
035
To disable or enable a loop event:
1. Press the Menu button and choose Control.
2. Enter a level one password.
3. Choose Enable/Disable.
4. Choose Loop Event.
5. Select the loop event type that you want to disable or enable.
See “Event ID numbers and descriptions” on page 137 for event descriptions and the list
above for the events that can be disabled.
6. Press Enter.
7. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.

Kidde FX-64 Specifications

General

Brand	Kidde
Model	FX-64
Category	Fire Alarms
Language	English