Kyocera ECOSYS M3040dn User Manual

4-13
Printing from PC > Printing Data Saved on the Printer
2
Print the document.
1 Press the [ ▲ ] or [ ▼ ] key to select the document to print, and press [Select].
The file is selected. A checkmark will be placed on the right of the selected file.
Select the checkmarked file and press [Select] again to cancel the selection.
2 Press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Print], and press the [ OK ] key.
4 Specify the number of copies to print as desired, and press the [ OK ] key.
5 Press [Yes] in the confirmation screen.
Printing starts.
Deleting the Documents
Delete the documents stored in a Stored Job box. The procedure is as follows.
1
Display the screen.
1 Press the [ Document Box/USB ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Job Box], and press the [ OK ] key.
NOTE
Press [Menu] to perform the following operations.
• [Select All]: Select all files.
• [Clear All]: Cancel all the file selections.
• [Detail]: Display the details for the selected document.
NOTE
If the document is protected by an access code, the password entry screen will be
displayed. Enter the password using the numeric keys.
1
User 01:
Data 01
Data 02
Data 03
Menu Select
2
21
User 01:
Print
01
Delete
02
21
Document Box:
02
Sub Address Box
03
Job Box
04
Polling Box

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome