Name: Kyocera ECOSYS M3040dn
Brand: Kyocera
Rating: 5 (1 reviews)

To Next Page

To Previous Page

1-3

Legal and Safety Information > Notice

Environment

The service environmental conditions are as follows:

• Temperature: 50 to 90.5 °F (10 to 32.5 °C)

(But humidity should be 70% or less when temperature is 90.5 °F (32.5 °C).)

• Humidity: 15 to 80%

(But temperature should be 86 °F (30 °C) or less when humidity is 80%.)

Adverse environmental conditions may affect the image quality. It is recommended to use the machine at a temperature:

around 60.8 to 80.6 °F or less (16 to 27 °C), humidity: around 36 to 65%.

Avoid the following locations when selecting a site for the machine.

• Avoid locations near a window or with exposure to direct sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature fluctuations.

• Avoid locations with direct exposure to hot or cold air.

• Avoid poorly ventilated locations.

If the floor is delicate against casters, when this machine is moved after installation, the floor material may be damaged.

During copying, some ozone is released, but the amount does not cause any ill effect to one's health. If, however, the

machine is used over a long period of time in a poorly ventilated room or when making an extremely large number of

copies, the smell may become unpleasant. To maintain the appropriate environment for copy work, it is suggested that

the room be properly ventilated.

Kyocera ECOSYS M3040dn Specifications

General

Kyocera ECOSYS M3040dn User Manual

Other manuals for Kyocera ECOSYS M3040dn