Kyocera ECOSYS M3040dn User Manual

9-33
User Authentication and Accounting (User Login, Job Accounting) > Setting an Account
Job Accounting for the FAX Transmitted from a
Computer
The number of FAX jobs transmitted from the computer can be managed by Job Accounting.
Setting FAX Driver
To manage the number of FAX jobs transmitted from the computer, you need to configure the following settings by using
the FAX Driver on the computer.
1
Display the screen.
1 Click [ Start ] button on the Windows, and then click [ Devices and Printers ].
2 Right click the name of the machine to be used as the FAX Driver and select [ Printing
preferences
] from the resulting pull-down menu.
3 Click [ FAX TX Setting ] in the [ Printing Preferences ] window.
2
Configure the settings.
1 Select [ Job Accounting ] on the [ Authentication ] tab.
2 Set the Job Accounting.
[ Use Specific Account ID ]: Enter the Account ID. Transmission will be performed using the entered
Account ID.
[
Prompt for Account ID ]: A screen for entering the Account ID will be displayed when attempting a
transmission. The Account ID must be entered each time a transmission is attempted.
3 Click [ OK ].
NOTE
FAX functions are available only on products with the fax function installed.
NOTE
In Windows 8, select [ Settings ] in charms on Desktop, and select [ Control Panel ], and
then [
Devices and Printers ].
1
2

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome