Kyocera ECOSYS M3040dn User Manual

4-18
Printing from PC > Printing Data Saved on the Printer
Printing Document from Proof and Hold Box
The Proof and Hold feature produces only a single proof print of multiple-print job and holds printing of the remaining
copies. Printing a multiple-print job in Proof and Hold using the printer driver allows only a single copy to be printed while
maintaining the document data in the Job Box. To continue to print the remaining copies, use the operation panel. You
can change the number of copies to print.
The following operations are possible:
• Printing the Documents (page 4-18
)
• Deleting the Documents (page 4-19
)
Printing the Documents
You can print the documents stored in the Proof and Hold box. The procedure is as follows.
1
Display the screen.
1 Press the [ Document Box/USB ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Job Box], and press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Quick Copy], and press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select the creator of the document, and press the [ OK ] key.
21
Document Box:
02
Sub Address Box
03
Job Box
04
Polling Box
21
Job Box:
Private
01
Quick Copy
02
21
Quick Copy:
User 01
User 02
User 03

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome