Kyocera ECOSYS M3040dn User Manual

5-16
Operation on the Machine > Sending
Specifying Destination
Select the destination using either of the following methods:
• Choosing from the Address Book (page 5-16)
• Choosing from the External Address Book
For details on the External Address Book, refer to Command Center RX User Guide.
• Choosing from the One Touch Key (page 5-18)
• Entering an E-mail Address (page 5-18)
• Specifying a New PC Folder (page 5-19)
• Choosing from the FAX
For more information on using the FAX, refer to the FAX Operation Guide.
Choosing from the Address Book
Select a destination registered in the Address Book.
For more information about how to register destinations in the Address Book, refer to Registering Destinations in the
Address Book on page 3-30.
1
In the basic screen for sending, press the [Address Book] key.
2
Select the destination.
1 Press the [ ▲ ] or [ ▼ ] key to select [Address Book], and press the [ OK ] key.
NOTE
• You can set the machine up so that the address book screen appears when you press the [ Send ] key. For details,
refer to Default Screen on page 8-18
.
• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the other
party number using the numeric keypad.
NOTE
For details on the External Address Book, refer to Command Center RX User Guide .
Select Addr Book:
Address Book
Exit
Ext Address Book
21

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome