6-15
Using Various Functions > Functions
Combine
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
Select [2 in 1] or [4 in 1], and select the page layout from "Layout".
Item Value Description
Off
― Disables the function.
2 in 1
― Press the [
OK
] key to copy the original with the default setting. For the default
settings, refer to Function Default on page 8-27.
2 in 1 Layout
L to R T to B,
R to L
Press [Detail] to display the [2 in 1 Layout] screen.
Select the page layout of scanned originals, and press the [
OK
] key.
Border Line
None, Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and press the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [
OK
] key.
4 in 1
― Press the [
OK
] key to copy the original with the default setting. For the default
settings, refer to Function Default on page 8-27.
4 in 1 Layout
Right then Down,
Down then Right,
Left then Down,
Down then Left
Press [Detail] to display the [4 in 1 Layout] screen.
Select the page layout of scanned originals, and press the [
OK
] key.
Border Line
None, Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and press the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [
OK
] key.
To Next Page
Loading...
