Kyocera ECOSYS M3040dn

6-9
Using Various Functions > Functions
Orig. Orientation (Original Orientation)
Select the orientation of the original document top edge to scan correct direction.
To use any of the following functions, the document's original orientation must be set.
•Duplex
• Combine
• Duplex (2-sided Original)
Select original orientation from [Top Edge on Top] or [Top Edge on Left].
Collate
Collate the output by page.
(
Value : [Off] / [On])
Item Image
Top Edge on Top
Top Edge on Left
NOTE
The default setting for Original Orientation can be changed. Refer to Orig. Orientation on page 8-27 for details.
Copy
Send
Scan to
USB
Original Original orientation
Original Original orientation
Copy
Print from
Box
Print from
USB