6-22
Using Various Functions > Functions
File Format
Specify the image file format. Image quality level can also be adjusted. Select the file format from [PDF], [TIFF], [JPEG],
[XPS], and [High Comp. PDF].
When the color mode in scanning has been selected for Grayscale or Full Color, set the image quality.
If you selected [PDF] or [High Comp. PDF], you can specify encryption or PDF/A settings.
Item Value Description
PDF
*2
― Press the [
OK
] key to save or send a PDF file.
The image quality and PDF/A settings will be the default settings. For the
default settings, refer to Function Default on page 8-27.
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Press [Detail] to display the [Image Quality] screen.
Select the image quality and press the [
OK
] key.
PDF/A
Off, PDF/A-1a, PDF/A-1b Select PDF/A-1 format type and press the [
OK
] key.
Encryption
Off, On Set the PDF encryption and then press the [
OK
] key. If [On] is selected,
refer to PDF Encryption Functions on page 6-23.
TIFF
― Press the [
OK
] key to save or send a TIFF file.
The Image Quality settings will be the default values. For the default
settings, refer to Function Default on page 8-27.
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Press [Detail] to display the [Image Quality] screen.
Select the image quality and press the [
OK
] key.
XPS
― Press the [
OK
] key to save or send a XPS file.
The Image Quality settings will be the default values. For the default
settings, refer to Function Default on page 8-27
.
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Press [Detail] to display the [Image Quality] screen.
Select the image quality and press the [
OK
] key.
JPEG
― Press the [
OK
] key to save or send a JPEG file.
The Image Quality settings will be the default values. For the default
settings, refer to Function Default on page 8-27
.
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Press [Detail] to display the [Image Quality] screen.
Select the image quality and press the [
OK
] key.
To Next Page
Loading...
