5-21
Operation on the Machine > Sending
3
Confirm the information.
The connection confirmation screen appears. Press [Yes] to check the connection and [No] to
not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To send to multiple destinations, repeat steps 1 to 3.
Destinations can be changed later. Refer to Checking and Editing Destinations on page 5-21
.
Checking and Editing Destinations
Check and edit a selected destination.
1
Display the screen.
Referring to Specifying Destination on page 5-16, specify the destination.
2
Check and edit the destination.
Press the [
Confirm/Add Destination
] key.
Add the destination
1
Press [Add].
2
Refer to Specifying Destination on page 5-16 to set the destinations to be added.
Edit the destination
1
Press the [
ā²
] or [
ā¼
] key to select the destination you want to edit, and press the [
OK
] key.
2
Press the [
ā²
] or [
ā¼
] key to select [Edit], and press the [
OK
] key.
3
Refer to Specifying Destination on page 5-16 to set the destinations to be added.
To Next Page
Loading...
Need help?
General
