8-24
Setup and Registration (System Menu) > System Menu
Measurement
Error Handling
Date Setting
Configure settings related to the date and time.
Common Settings Measurement
Item Description
Measurement
Select inch or metric for the unit for paper dimensions.
Value: inch, mm
Common Settings Error Handling
Item Description
Error
Handling
DuplexPaperError
Set what to do when duplex printing is not possible for the selected paper sizes and
media types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
PaperMismatchErr
Set what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Common Settings Date Setting
Item Description
Date Setting Date/Time
Set the date and time for the location where you use the machine.
Value: Year (2000 to 2037), Month (01 to 12), Day (01 to 31), Hour (00 to 23), Minute
(00 to 59), Second (00 to 59)
Setting Date and Time (page 2-11)
Date Format
Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Time Zone
Set the time difference from GMT. Choose the nearest listed location from the list. If you
select a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (page 2-11)
Summer Time
To Next Page
Loading...
Need help?
General
