Kyocera ECOSYS M3040dn

9-24
User Authentication and Accounting (User Login, Job Accounting) > Enabling Job Accounting
Job Accounting Access
Set the job accounting access.
1
Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [User/Job Account], and press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Job Account.Set.], and press the [ OK ] key.
2
Configure the settings.
1 Press the [ ▲ ] or [ ▼ ] key to select [AccountingAccess], and press the [ OK ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Local] or [Network] and press the [ OK ] key.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
NOTE
To select [Network], network authentication must be enabled and [Ext.] must be selected
for server type.
Sys. Menu/Count.:
User/Job Account
Exit
04
Counter
03
02
System/Network
Login User Name Login Password
4000 4000