Kyocera ECOSYS M3040dn User Manual

5-48
Operation on the Machine > Removing USB Memory
Removing USB Memory
Follow the steps below to remove the USB memory.
1
Display the screen.
1 Press the [ Document Box/USB ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [USB Memory], and press the [ OK ] key.
2
Select [Remove Memory].
1 Press [Menu].
2 Press the [ ▲ ] or [ ▼ ] key to select [Remove Memory], and press the [ OK ] key.
3
Remove the USB memory.
Remove the USB memory after "USB memory can be safely removed." is displayed.
IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB memory.
NOTE
USB memory can also be removed after checking the status of the device. Refer to
Checking Device Status on page 7-15
.
21
Document Box:
03
04
USB Memory
05
Polling Box
Job Box
USB Memory:
Menu Select
Store File
Folder 01
Folder 02
21
Menu:
Memory Detail
01
Remove Memory
02

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome