2-30
Installing and Setting up the Machine > Installing Software
Installing Software in Mac Computer
The machine's printer functionality can be used by a Mac computer.
1
Insert the DVD.
Double-click the [Kyocera] icon.
2
Display the screen.
Double-click [Kyocera OS X x.x] depending on your Mac OS version.
3
Install the Printer Driver.
Install the printer driver as directed by the instructions in the installation software.
This completes the printer driver installation.
If a USB connection is used, the machine is automatically recognized and connected.
If an IP connection is used, the settings below are required.
• Installation on MAC OS must be done by a user logged on with administrator privileges.
• When printing from a Mac computer, set the machine's emulation to [KPDL] or [KPDL(Auto)].
For details, refer to Printer on page 8-33.
• If connecting by Bonjour, enable Bonjour in the machine's network settings.
For details, refer to Bonjour on page 8-8.
• In the Authenticate screen, enter the name and password used to log in to the operating system.
To Next Page
Loading...
Need help?
General
