Kyocera ECOSYS M3040dn

7-9
Status/Job Cancel > Checking Job History
2 Press the [ ▲ ] or [ ▼ ] key to select [Print Job Log], [Send Job Log], [Store Job Log] or [FAX
Job Log], and press the [
OK ] key.
2
Select the job you want to check.
Press the [ ▲ ] or [ ▼ ] key to select the job you want to check, and press [Detail].
A job result icon is displayed on the extreme right of each job.
• : The job has been completed.
• : An error has occurred.
• : The job has been canceled.
3
Check the job history.
Press the [ ► ] key to view the next screen. Press the [ ◄ ] key to return to the previous screen.
NOTE
[FAX Job Log] is displayed only on products with the fax function installed. For details,
refer to the
FAX Operation Guide .
NOTE
You can show the job log of all users, or only your own job log. For details, refer to Disp.
Status/Log (Display Status/Log) on page 8-31. This setting can also be changed from
Command Center RX. For details, refer to the
Command Center RX User Guide .
Print Job Log (page 7-10)
Send Job Log (page 7-11)
Store Job Log (page 7-12)
21
Status:
Store Job Log
Pause
07
Print Job Log
05
Send Job Log
06
Print Job Log:
0011
0012
0013
doc00001234
doc00001235
Microsftwor
Detail
1
2
0011
Result:
OK
Detail:
1/ 9