8-26
Setup and Registration (System Menu) > System Menu
Item Description
Timer
Setting
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
•Network
• Card Reader
*1
•FAX
*2
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
*1 Displayed only when the optional Card Authentication Kit is installed.
*2 Displayed only on products with the fax function installed.
Sleep Timer
Set amount of time before entering Sleep.
Value
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Sleep and Auto Sleep (page 2-19)
This function is displayed when [Auto Sleep] is set to [On].
Power Off Rule
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
•Network
•FAX
*2
• USB Cable
• USB Host
•RAM Disk
•NIC
*3
• Remote Diag.
Value: Off, On
Even when any of the functions is set to [On], if either [FAX] or [NIC] is set to [Off], the
machine does not enter Power Off Mode.
When [RAM Disk] is set to [On], even if the data is in the RAM disk, the machine enters
Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not
communicate with the other devices, the machine will enter Power Off Mode.
*3 Displayed only when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Power Off Timer
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours,
1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 1 week
To Next Page
Loading...
Need help?
General
