Kyocera ECOSYS M3040dn User Manual

9-4
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
When selecting [Netwk Authentic.]
1 Press the [ ▲ ] or [ ▼ ] key to select [NTLM], [Kerberos] or [Ext.] as the server type, and
press the [
OK ] key.
2 Enter the host name (64 characters or less) for the Authentication Server and press the
[
OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select the domain name for the Authentication Server, and
press the [
OK ] key.
If the domain has not been set, select the number where “----------------” is displayed and press
[Menu]. Select [Edit] and press the [
OK ] key then enter the domain name (in 256 characters or less).
Press the [
OK ] key and the domain will be registered.
To edit or delete a domain name that has already been registered, select that domain name and
press [Menu].
4 When selecting [Ext.] as the server type, enter the port number and press the [ OK ] key.
NOTE
Up to 10 domain names can be registered.
NOTE
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings.

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome