Kyocera ECOSYS M3040dn User Manual

9-9
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
Change the user properties.
Changing user properties
1 Press the [ ▲ ] or [ ▼ ] key to select the user whose properties you wish to change, and press
the [
OK ] key.
2 Refer to step 2-4 of Adding a User (Local User List) to change a user property.
3 Press the [ OK ] key.
4 Press [Yes] in the registration confirmation screen.
The user information is changed.
Deleting a user
1 Press the [ ▲ ] or [ ▼ ] key to select the user whose properties you wish to delete, and press
[Menu].
2 Press the [ ▲ ] or [ ▼ ] key to select [Delete], and press the [ OK ] key.
3 Press [Yes] in the deletion confirmation screen.
The selected user will be deleted.
To change the user information of logged in user (User Property)
These users can partially change their own user properties including user name, login password, and E-mail address.
Although "Login User Name", "Access Level", or "Account Name" cannot be changed, the users can check the present
status.
1
Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [User Property], and press the [ OK ] key.
NOTE
The default user with administrator rights cannot be deleted.
Local User List:
DeviceAdmin
Menu
Admin
User 01
Sys. Menu/Count.:
System/Network
Exit
03
User Property
04
05
User/Job Account

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome