Kyocera ECOSYS M3040dn User Manual

10-12
Troubleshooting > Troubleshooting
2 or more sheets are
overlaps when ejected.
(multi feed)
― Load the paper correctly. page 3-7
page 3-12
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. page 3-7
page 3-12
Is the paper damp? Replace the paper with new paper. page 3-7
Printouts are curled. Is the paper damp? Replace the paper with new paper. page 3-7
Cannot print. Is the machine plugged in? Plug the power cord into an AC outlet. ―
Is the machine powered on? Turn on the power switch. page 2-8
Are the printer cable and network cable
connected?
Connect the correct printer cable and
network cable securely.
page 2-6
Was the machine powered on before the
printer cable was connected?
Power on the machine after connecting
the printer cable.
―
Is the print job paused? Resume printing. page 7-4
Cannot print with USB
memory.
USB memory not
recognized.
Is the USB host blocked? Select [Unblock] in the USB host
settings.
page 8-15
― Check that the USB memory is securely
plugged into the machine.
―
Dirt on the top edge or back
of the paper.
Is the interior of the machine dirty? Clean the interior of the machine. page 10-3
Symptom Checkpoints Corrective Actions
Reference
Page

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome