Kyocera ECOSYS M3040dn User Manual

10-22
Troubleshooting > Troubleshooting
U
Y
Message Checkpoints Corrective Actions
Reference
Page
Unknown Toner Installed.
PC
Does the installed toner container's
regional specification match the
machine's?
Install the specified toner container. page 10-5
USB memory error. Job is
canceled.
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Press the
[
OK ] key.
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
—
— An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the removable memory
is not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory.
—
Message Checkpoints Corrective Actions
Reference
Page
You cannot use this box.
Job is canceled.
— You cannot use the specified box.
Job is canceled. Press the [
OK ] key.
—

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome