2J0/2J1/2J2
1-5-19
6. Remove the one screw and one terminal
from the fuser heater lamp.
7. Remove the fuser heater lamp.
8. Check or replace the fuser heater lamp and
refit all the removed parts.
Seat the fuser heater lamp aligning its watt-
age mark and welding mark faced with the
correct direction and side.
Figure 1-5-24
Nut
Terminal
Screw
Wattage mark
Screw
Welding mark
Fuser heater lamp
Fuser heater lamp
To Next Page
Loading...
