6-4
Using Various Functions > Functions Available on the Machine
Configure the settings
for continuous
scanning, mirror
image copies, and
Skip Blank Page
function.
Continuous Scan
Scans a large number of originals in separate batches
and then produce as one job.
page 6-52
Negative Image
Inverts black and white portions of the image for
printing.
page 6-52
Mirror Image
Copies the mirrored image of the original. page 6-52
Job Finish Notice
Sends E-mail notice when a job is complete. page 6-53
File Name Entry
Adds a file name. page 6-53
Priority Override
Suspends the current job and gives a new job top priority.
page 6-54
Repeat Copy
Enables additional copies in the desired quantity as
necessary after a copy job is completed.
page 6-54
OHP Backing Sheet
When printing to sheets of transparency, automatically
inserts a paper between them.
page 6-55
DP Read Action
When the document processor is used, select the
scanning operation for the document processor.
page 6-56
Skip Blank Page
When there are blank pages in a scanned document,
this function skips the blank pages and prints only
pages that are not blank.
page 6-56
Quiet Mode
Lower print and scan speed for quiet processing. page 6-56
Tab Function key Description
Reference
page
To Next Page
Loading...
