6-6
Using Various Functions > Functions Available on the Machine
Configure the settings
for transmission copy,
encrypted
transmission, and file
size confirmation.
Zoom
Adjust the zoom to reduce or enlarge the image. page 6-32
Centering
Centers the original image on the paper when sending
onto paper different from the original size.
page 6-36
Border Erase
Erases the black border that forms around the image. page 6-37
FAX Delayed
Transmission
Set a send time. Refer to the
FAX System
10 Operation
Guide
.
Continuous Scan
Scans a large number of originals in separate batches
and then produce as one job.
page 6-52
Job Finish Notice
Sends E-mail notice when a job is complete. page 6-53
File Name Entry
Adds a file name. page 6-53
E-mail Subject/Body
Adds subject and body when sending a document. page 6-64
i-FAX Subject/Body
Adds subject and body when sending a document by i-
FAX.
Refer to the
FAX System
10 Operation
Guide
.
FAX Direct
Transmission
Sends FAX directly without reading original data into
memory.
Refer to the
FAX System
10 Operation
Guide
.
FAX Polling RX
Dial the destination and receive documents for Polling
Transmission stored in the polling box.
Refer to the
FAX System
10 Operation
Guide
.
Send and Print
Prints a copy of the document being sent. page 6-64
Send and Store
Stores a copy of the document being sent in a Custom
Box.
page 6-65
FTP Encrypted TX
Encrypts images when sending via FTP. page 6-65
Text Stamp
You can add a text stamp on the documents. page 6-48
Bates Stamp
You can add a bates stamp on the documents. page 6-50
File Size
Confirmation
Checks the file size before sending/storing the original. page 6-66
FAX TX Report
Print a report of fax transmission results. Refer to the
FAX System
10 Operation
Guide
.
Skip Blank Page
When there are blank pages in a scanned document,
this function skips the blank pages and sends only
pages that are not blank.
page 6-56
Quiet Mode
Lower print and scan speed for quiet processing. page 6-56
Tab Function key Description
Reference
page
To Next Page
Loading...
