9-30
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
"User Login Setting" [
Next
] > "Simple Login Settings" [
Next
] > "Simple Login Key" [
Next
]
2
Enter the user information.
1
Select the key to which you want to register a user.
2
Select [
Add/Edit
].
3
"Display Name" [
Change
] > Enter the user name to be displayed > [
OK
]
4
Select "User" [
Change
].
5
To specify the user from local users, select [
Local User
]. To specify from network users,
select [
Network User
].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
For details on entering characters, refer to the following:
Character Entry Method (page 11-10)
To Next Page
Loading...
