9-48
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Count by Paper Size
This counts the number of pages by paper size (e.g. Letter).
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If you do not specify
the media type, the number of used sheets will be counted for the specified sheet size, regardless of the media type.
1
Display the screen.
1 [System Menu] key > [User Login/Job Accounting] > "Job Accounting Settings" [Next]
2 "Job Accounting (Local)" [Next] > "Default Setting" [Next] >
"Count by Paper Size" [Next]
2
Configure the settings.
1 Select [On].
2 Select the paper size.
3 Select [Media Type] to specify media type.
4 Select the media type and select [OK].
5 Select [OK].
Paper size is available in four types, 1 to 4. These types are specified in accounting reports.
Print Accounting Report (page 9-51)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
To Next Page
Loading...
