10-31
Troubleshooting > Troubleshooting
B
C
Message Checkpoints Corrective Actions
Reference
Page
Box is not found.
— The specified box cannot be found.
Job is canceled. Select [
End
].
—
Box limit exceeded.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-53)
Is [End] displayed on the screen? The specified box is full, and no
further storage is available. Job is
canceled. Select [
End
]. Try to
perform the job again after printing
or deleting data from the box.
—
— Repeat Copy box is full, and no
further repeat copy is available.
Select [
Continue
] to print scanned
pages. Select [
Cancel
] to cancel
the job.
—
Message Checkpoints Corrective Actions
Reference
Page
Calibrating...
― The machine is under the
adjustment to maintain its quality.
Please wait.
―
Cannot Banner Print.
― System stamp is set up.
Banner print cannot be carried out.
Job is canceled. Select [
End
].
―
Cannot connect to
Authentication Server.
*1
— Set machine time to match the
server's time.
page 2-26
— Check the domain name. page 9-2
— Check the host name. page 9-2
— Check the connection status with
the server.
—
Cannot connect to
Server.
— Check the connection status with
the server.
—
Cannot duplex print on
this paper.
*1
Did you select a paper size/type
that cannot be duplex printed?
If the selected paper is not changed
and [
Continue
] is selected, duplex
is released.
Select the available paper. Select
[
Continue
] to print.
page 6-39
To Next Page
Loading...
