10-35
Troubleshooting > Troubleshooting
J
K
M
Message Checkpoints Corrective Actions
Reference
Page
Job Accounting
restriction exceeded.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-53)
Is the acceptable printing count
restricted by Job Accounting
exceeded?
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
The job is canceled. Select [
End
].
—
Job separator tray is full
of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper and select
[
Continue
]. Printing then resumes.
—
Message Checkpoints Corrective Actions
Reference
Page
KPDL error.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-53)
― PostScript error has occurred. The
job is canceled. Select [
End
].
―
Message Checkpoints Corrective Actions
Reference
Page
Machine failure.
― Internal error has occurred. Make a
note of the error code displayed on
the screen. Call service.
―
Mailbox tray is full of
paper.
Is the acceptable storage capacity
exceeded?
Remove the paper. Printing then
resumes.
—
Main unit inner tray is
full of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper. Printing then
resumes.
—
Maximum number of
scanned pages.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more.
Follow the instructions on the
screen.
—
Memory is full.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-53)
— The memory is full and the job
cannot be continued. Select
[
Continue
] to print the scanned
pages. The print job cannot be
processed completely. Select
[
Cancel
] to cancel the job.
—
— The process cannot be performed
due to insufficient memory. If only
[
End
] is available, select [
End
]. The
job will be canceled.
—
To Next Page
Loading...
