2-32
Installing and Setting up the Machine > Quick Setup Wizard
1
Display the screen.
[
System Menu
] key > [
Quick Setup Wizard
]
2
Select a function.
3
Configure the settings.
Start the wizard. Follow the instructions on the screen to configure settings.
If the user authentication screen appears, enter your login user name and login password and select [
Login
].
The factory default login user name and login password are set as shown below.
If you experience difficulty configuring the settings, refer to the following:
Help Screen (page 2-22)
Control Description
End Exits the wizard. Settings configured so far are applied.
Previous Returns to the previous item.
Skip Advances to the next item without setting the current item.
Next Advances to the next screen.
Back Returns to the previous screen.
Complete Register the settings and exit the wizard.
To Next Page
Loading...
