2-35
Installing and Setting up the Machine > Installing Software
3
Install using [Express Install].
You can also select [Use host name as port name] and set to use the host name of the
standard TCP/IP port. (A USB connection cannot be used.)
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and that it
is turned on and click (Refresh).
• If the Windows security window appears, click [Install this driver software anyway].
• To install Status Monitor, it is necessary to install Microsoft .NET Framework 4.0
beforehand.
To Next Page
Loading...
